Successfully passing the Cisco CCNA 200-301 exam and getting the latest 200-301 exam dumps is a top priority. The point is which to choose. ChatGPT tells you that the Pass4itSure 200-301 exam dumps are the year’s king! It’s time to know which one to choose.
Pass4itSure has updated the latest 200-301 exam dumps https://www.pass4itsure.com/200-301.html with 1190 new practice questions, making it up-to-date and effective to ensure you pass the Cisco 200-301 exam.
ChatGPT tells you that the Pass4itSure 200-301 exam dumps are king this year
The artificial intelligence chatbot model ChatGPT is popular worldwide, and it is said to help us answer questions smoothly. Therefore, on the question “which 200-301 dumps are worth buying at the moment“, I asked its opinion according to my actual needs.
ChatGPT’s answer was sincere, and I extracted some of the most effective critical messages from them:
- Make sure the 200-301 dumps can’t be outdated study material, which can delay 200-301 exam time, and time is money
- Ensure that the 200-301 dumps can’t be a high price, and must be free from financial pressure on the majority of test takers
- Make sure that the 200-301 dumps do not cheat the facts under the guise of viewing free exam questions
These Pass4itSure can do it.
Pass4itSure 200-301 exam dumps available for you
With ChatGPT and everyone’s two-factor authentication, it can be seen that these dumps do have something, let’s talk about it today.
- Pass4itSure provides you with personalized services with a simple and convenient purchase page, the most authentic Cisco 200-301 exam study materials, and presented in PDF and VCE formats, with diversified choices.
- It always defines the 200-301 exam dumps at a modest price of $45.99, leaving the majority of test takers without financial pressure.
- Moreover, it is not fraudulent, and it has been proved that Pass4itSure fits better with the 200-301 exam, and the questions are all set around the real test content, which is real and valid.
Free sharing of the latest questions about the Cisco 200-301 exam
Question New 1:
Which benefit does Cisco ONA Center provide over traditional campus management?
A. Cisco DNA Center leverages SNMPv3 for encrypted management, and traditional campus management uses SNMPv2.
B. Cisco DNA Center automates HTTPS for secure web access, and traditional campus management uses HTTP.
C. Cisco DNA Center leverages APIs, and traditional campus management requires manual data gathering.
D. Cisco DNA Center automates SSH access for encrypted entry, and SSH Is absent from traditional campus management.
Correct Answer: B
Question New 2:
Refer to the exhibit.
An engineer is configuring a Layer 3 port-channel interface with LACP. The configuration on the first device is complete, and it is verified that both interfaces have registered the neighbor device in the CDP table. Which task on the neighbor device enables the new port channel to come up without negotiating the channel?
A. Change the EtherChannel mode on the neighboring interfaces to auto.
B. Configure the IP address of the neighboring device.
C. Bring up the neighboring interfaces using the no shutdown command.
D. Modify the static EtherChannel configuration of the device to passive mode.
Correct Answer: D
Question New 3:
DRAG DROP
Refer to the exhibit.
Drag and drop the destination IPs from the left onto the paths to reach those destinations on the right.
Select and Place:
Correct Answer:
Question New 4:
Refer to the exhibit.
An engineer is bringing up a new circuit to the MPLS provider on the Gi0/1 interface of Router1 The new circuit uses eBGP and teams the route to VLAN25 from the BGP path. What\’s the expected behavior for the traffic flow for route 10.10.13.0/25?
A. Traffic to 10.10.13.0.25 is load balanced out of multiple interfaces
B. Route 10.10.13.0/25 is updated in the routing table as being learned from interface Gi0/1.
C. Traffic to 10.10.13.0/25 is asymmetrical
D. Route 10.10.13.0/25 learned via the GiO/0 interface remains in the routing table
Correct Answer: D
Question New 5:
What is recommended for the wireless infrastructure design of an organization?
A. group access points together to increase throughput on a given channel
B. configure the first three access points are configured to use Channels 1, 6, and 11
C. include a least two access points on nonoverlapping channels to support load balancing
D. assign physically adjacent access points to the same Wi-Fi channel
Correct Answer: B
Question New 6:
Refer to the exhibit. An engineer built a new L2 LACP EtherChannel between SW1 and SW2 and executed these show commands to verify the work. Which additional task allows the two switches to establish an LACP port channel?
A. Change the channel-group mode on SW2 to auto
B. Change the channel-group mode on SW1 to desirable.
C. Configure the interface port-channel 1 command on both switches.
D. Change the channel-group mode on SW1 to active or passive.
Correct Answer: D
Question New 7:
Router A learns the same route from two different neighbors; one of the neighbor routers is an OSPF neighbor, and the other is an EIGRP neighbor. What is the administrative distance of the route that will be installed in the routing table?
A. 20
B. 90
C. 110
D. 115
Correct Answer: B
The Administrative distance (AD) of EIGRP is 90 while the AD of OSPF is 110 so the EIGRP route will be chosen to install into the routing table.
Question New 8:
Refer to the exhibit. A network associate has configured OSPF with the command:
City(config-router)# network 192.168.12.64 0.0.0.63 area 0
After completing the configuration, the associate discovers that not all the interfaces are participating in OSPF. Which three of the interfaces shown in the exhibit will participate in OSPF according to this configuration statement? (Choose three.)
A. FastEthernet0 /0
B. FastEthernet0 /1
C. Serial0/0
D. Serial0/1.102
E. Serial0/1.103
F. Serial0/1.104
Correct Answer: BCD
The “network 192.168.12.64 0.0.0.63 equals to network 192.168.12.64/26. This network has:
1. Increment: 64 (/26= 1111 1111.1111 1111.1111 1111.1100 0000) + Network address:192.168.12.64
2. Broadcast address: 192.168.12.127
Therefore all interfaces in the range of this network will join OSPF.
Question New 9:
Configure IPv4 and IPv6 connectivity between two routers. For IPv4, use a /28 network from the 192.168.1.0/24 private range. For IPv6, use the first /64 subnet from the 2001:0db8:aaaa::/48 subnet.
1. Using Ethernet0/1 on routers R1 and R2, configure the next usable/28 from the 192.168.1.0/24 range. The network 192.168.1.0/28 is unavailable.
2. For the IPv4 /28 subnets, router R1 must be configured with the first usable host address.
3. For the IPv4 /28 subnets, router R2 must be configured with the last usable host address.
4. For the IPv6 /64 subnet, configure the routers with the IP addressing provided from the topology.
5. A ping must work between the routers on the IPv4 and IPv6 address ranges.
See the below.
A. Check the below
B. Place Holder
C. Place Holder
D. Place Holder
Correct Answer: A
Answer as below configuration:
on R1 config terminal ipv6 unicast-routing inter eth0/1 ip address 192.168.1.1 255.255.255.240 ipv6 address 2001:db8:aaaa::1/64 not shut end copy running start
on R2 config terminal ipv6 unicast-routing inter eth0/1 ip address 192.168.1.14 255.255.255.240 ipv6 address 2001:db8:aaaa::2/64 not shut end copy running start
for test from R1 ping ipv6 2001:db8:aaaa::1 for test from R2 ping ipv6 2001:db8:aaaa::2
Question New 10:
An organization has a Cisco FTD that uses bridge groups to pass traffic from the inside interfaces to the outside interfaces. They are unable to gather information about neighboring Cisco devices or use multicast in their environment. What must be done to resolve this issue?
A. Create a firewall rule to allow CDP traffic
B. Create a bridge group with the firewall interfaces
C. Change the firewall mode to transparent
D. Change the firewall mode to routed
Correct Answer: D
Question New 11:
Refer to the exhibit. Router R1 currently is configured to use R3 as the primary route to the Internet, and the route uses the default administrative distance settings. A network engineer must configure R1 so that it uses R2 as a backup, but only if R3 goes down. Which command must the engineer configure on R1 so that it correctly uses R2 as a backup route, without changing the administrative distance configuration on the link to R3?
A. ip route 0.0.0.0 0.0.0.0 g0/1 1
B. ip route 0.0.0.0 0.0.0.0 209.165.201.5 10
C. ip route 0.0.0.0 0.0.0.0 209.165.200.226 1
D. ip route 0,0.0.0 0.0.0.0 g0/1 6
Correct Answer: D
Question New 12:
DRAG DROP
Drag and drop the statements about access-point modes from the left onto the corresponding modes on the right.
Select and Place:
Correct Answer:
Question New 13:
Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4? (Choose two.)
A. It establishes a static route to the 172.16.3.0 network.
B. It establishes a static route to the 192.168.2.0 network.
C. It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.
D. It configures the router to send any traffic for an unknown destination out of the interface with the address 192.168.2.4.
E. It uses the default administrative distance.
F. It is a route that would be used last if other routes to the same destination exist.
Correct Answer: AE
Question New 14:
Refer to the exhibit. Which path is used by the router for Internet traffic?
A. 209.165.200.0/27
B. 10.10.10.0/28
C. 0.0.0.0/0
D. 10.10.13.0/24
Correct Answer: C
Question New 15:
Which action implements physical access control as part of the security program of an organization?
A. setting up IP cameras to monitor key infrastructure
B. configuring a password for the console port
C. backing up syslogs at a remote location
D. configuring enable passwords on network devices
Correct Answer: A
Download free 200-301 exam questions PDF
Latest 200-301 pdf free download: https://drive.google.com/file/d/1_cRoAyec2CHnwI5mExIJHV6REAbNOEyR/view?usp=share_link
Write this:
I believe everyone should also see that if you have recently taken the 200-301 exam and have plans to start 200-301 exam dumps, it can be the first choice. Get the full Pass4itSure 200-301 exam dumps now https://www.pass4itsure.com/200-301.html start your exam journey.